产品名称:PL15型调频振动式筛浆机(Lab pulp screen)
编  号:193422-867
型  号:PL15型
标准价格:26400元/台
促销价格:26400元/台
更新时间:2010.07.20
出品单位:咸阳泰思特试验设备有限公司
 点击查看大图片

    PL15型调频振动式筛浆机(萨默维尔型振动筛,somerville-type screening),是用于筛分浆料中的杂质,测定纸浆中的碎片等杂质的含量,在制浆造纸实验室中使用该筛浆机,可减少纸浆悬浮液中不符合工艺要求的杂质数量,得到洁净的良浆。该机是尺寸为270×320的平板式振动筛浆机,可选配不同规格缝隙的筛板,它是将打好的纸浆,采用振动式真空抽吸作用,对纸浆纤维进行筛选。同时该机还可作为平筛仪使用。
    筛分的目的是分离机械浆中的碎片等杂质, 和纸浆再生纤维中大的粘胶物, 塑料, 泥沙,铁屑和片状物,然后再进行检查和量化。
  
    PL15型调频振动式筛浆机是采用调速减速机通过连接轴带动凸轮,上下振动底板,从而使浆料产生高频振动,合格的浆料通过筛缝,不合格的纤维和渣料留在筛板上。  
    体积小,振动频率可调,筛板拆卸简单,操作方便,可根据浆料选择不同的频率,以达到最佳效果,为生产提供最可靠的实验数据。 
    参数: 
    筛选面积:54200m㎡ 
    304不锈钢筛框尺寸:311mm×292mm 
    出厂筛板筛缝规格:0.25mm(可以订制缝宽)
    浆料振动频率:400--3000次/分钟,手动调节,数字显示 
    橡胶膜驱动振幅:3.2±0.1mm 
    浆料筒尺寸(长×宽×高) :320mm×270mm×300mm 
    电机功率:750W 
    减速机转速:200~1000r/min 
    外形尺寸:1100mm(长)×360mm(宽)×880mm(高) 
    符合标准:TAPPI275。
    水源要求:水流速率为8.6 L / min;水压为1.23 Kg/cm2.
 

    *可选项
    
 将缝筛板换成圆孔筛(孔的尺寸:Φ2mm 或Φ3mm),可作为平筛仪使用,用来筛分纸浆,测量纤维束。


    PL15 Lab Pulp Screen(somervill-type screening)

    Is the pulping papermaking laboratory uses the pulp screen, reduces in the paper pulp suspending liquid in the papermaking experiment not to conform to the technological requirement impurity quantity, obtains the pure good thick liquid. This machine is the size for 270×320 the plate-type vibration pulp screen, may choose and match the different specification slit the lamina cribrosa, it is hits the good paper pulp, uses the mode of vibrations vacuum take-off function, carries on screening to the paper pulp textile fiber. Simultaneously this machine may also take sieves the meter use evenly. Parameters.
     The PL15 frequency modulation mode of vibrations pulp screen is uses the velocity modulation speed reducer to lead the cam through the carrying axle, high and low vibrates the ledger wall, thus causes the pulp to have the high frequency vibration, the qualified pulp through sieves the seam, the unqualified textile fiber and the dregs material keep on the lamina cribrosa.
    The volume is small, vibrational frequency adjustable, the lamina cribrosa disassemblage is simple, the ease of operation, may act according to the pulp choice different frequency, achieves the desired effect, provides the most reliable empirical datum for the production.
    1.Screening area:54200mm2 
    2.Screen box sizes:311mm*292mm
    3.Factory sieve-plate slot specifications:0.25mm
    4.Vibration frequency:400-3000 times per minute
    5.Pulp cylinder size(Long×width×high):320mm*270mm*300mm
    6.Electric moto power:750W
    7.Machine of decelerate speed:200~1000r/min
    8.Outer dimentsions:1100mm(long)*360mm(width)*880mm(high)
    9.Source: continuous water

| 查看次数: