TAPPI 美国制浆造纸技术协会介绍
世界造纸工业中规模和影响最大的专业学术团体。简称TAPPI。创立于 1915年。总部设在美国佐治亚州的亚特兰大市(Atlanta,Georgia)。协会下设涂布和印刷、瓦楞纸箱、工程设计、环境科学、管理科学、纸和纸板、纸的完成加工、合成纸、制浆、研究开发、检测等11个技术部门,它们分别领导70多个专业委员会。协会还在美国各地设有分会。协会会员分为正式会员、准会员、非正式会员、学生会员、赞助协会活动的团体会员等5类。正式会员须具备受过技术教育并在制浆、造纸或有关工业中从事技术工作达 10年的资格。现有各类会员2.9万余人,除美国本国外,还包括遍及70多个国家和地区的海外会员。
协会的宗旨是收集和传播制浆、造纸及有关工业的技术情报,组织学术交流,为会员服务。协会下的每个专业委员会每年至少活动2~3次,研讨会员共同感兴趣的问题。此外,协会每年召开各种专业会议约40次,其会议记录发行世界各地。协会制订的测试方法为许多国家造纸工业所采用。协会还出版TAPPI会刊(月刊,每年有一期增刊),内容以学术论文和技术性文章为主,在世界造纸工业中有一定的影响。
DocumentNumber Date Language Title
TAPPI 0109 DIRTT N/A Size Estimation Chart - Includes Tappi T 564
TAPPI T 203 CM 1999.01.01 Alpha-, beta- and gamma-cellulose in pulp
TAPPI T 207 CM 2008.01.01 Water solubility of wood and pulp
TAPPI T 210 CM 2003.01.01 Sampling and Testing Wood Pulp Shipments for Moisture
TAPPI T 211 OM 2002.01.01 Ash in wood, pulp, paper and paperboard: combustion at 525掳C
TAPPI T 221 CM 2009.01.01 Drainage time of pulp
TAPPI T 227 OM 2009.01.01 Freeness of pulp (Canadian standard method)
TAPPI T 230 OM 2008.01.01 Viscosity of pulp (capillary viscometer method)
TAPPI T 231 CM 2007.01.01 Zero-Span Breaking Strength of Pulp (Dry Zero-Span Tensile)
TAPPI T 233 CM 2006.01.01 Fiber length of pulp by classification
TAPPI T 235 CM 2000.01.01 Alkali Solubility of Pulp at 25 Degrees C
TAPPI T 237 CM 2008.01.01 Carboxyl content of pulp
TAPPI T 245 CM 2007.01.01 Silicates and Silica in Pulp (Wet Ash Method)
TAPPI T 248 SP 2008.01.01 Laboratory beating of pulp (PFI mill method)
TAPPI T 249 CM 1985.01.01 Carbohydrate composition of extractive-free wood and wood pulp by gas-liquid chromatography
TAPPI T 252 2002.01.01 PH and Electrical Conductivity of Hot Water Extracts of Pulp, Paper, and Paperboard
TAPPI T 255 CM 2007.01.01 Water-Soluble Sulfates in Pulp and Paper
TAPPI T 259 SP 2005.05.23 Species identification of nonwood plant fibers
TAPPI T 264 CM 2007.01.01 Preparation of Wood for Chemical Analysis
TAPPI T 265 CM 1999.01.01 Natural dirt in wood chips
TAPPI T 272 SP 2002.01.01 Forming handsheets for reflectance testing of pulp (sheet machine procedure)
TAPPI T 274 SP 2004.01.01 Laboratory screening of pulp (MasterScreen-type instrument)
TAPPI T 278 SP 2004.01.01 Pulp screening (Valley-type screening device)
TAPPI T 282 PM 2007.01.01 Hexeneuronic acid content of chemical pulp
TAPPI T 402 SP 2008.01.01 Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products
TAPPI T 406 OM 2004.01.01 Reducible sulfur in paper and paperboard
TAPPI T 409 SP 2009.01.01 Machine direction of paper and paperboard
TAPPI T 410 OM 2008.01.01 Grammage of paper and paperboard (weight per unit area)
TAPPI T 414 OM 2004.01.01 Internal tearing resistance of paper (Elmendorf-type method)
TAPPI T 419 OM 2002.01.01 Starch in paper
TAPPI T 428 OM 2004.01.01 Hot water extractable acidity or alkalinity of paper
TAPPI T 430 CM 2009.01.01 Copper number of pulp, paper, and paperboard
TAPPI T 432 CM 2009.01.01 Water absorbency of bibulous papers
TAPPI T 437 OM 2008.01.01 Dirt in paper and paperboard
TAPPI T 441 OM 2009.01.01 Water absorptiveness of sized (non-bibulous) paper, paperboard, and corrugated fiberboard (Cobb test)
TAPPI T 448 OM 2009.01.01 Water vapor transmission rate of paper and paperboard at 23 Degree C and 50% RH
TAPPI T 452 OM 2008.01.01 Brightness of pulp, paper, and paperboard (directional reflectance at 457 nm)
TAPPI T 453 SP 2004.01.01 Effect of Dry Heat on Properties of Paper and Board
TAPPI T 454 OM 2006.01.01 Turpentine Test for Voids in Glassine and Greaseproof Papers
TAPPI T 455 SP 2009.01.01 Identification of wire side of paper
TAPPI T 456 OM 2003.01.01 Tensile breaking strength of water-saturated paper and paperboard ( wet tensile strength ) - Revised and Reinstated: Corrected-2005
TAPPI T 459 OM 2003.01.01 Surface strength of paper (wax pick test)
TAPPI T 461 CM 2000.01.01 Flame resistance of treated paper and paperboard
TAPPI T 462 CM 2006.01.01 Castor-oil penetration test for paper - Editorial Correction
TAPPI T 479 CM 1999.01.01 Smoothness of paper (Bekk method)
TAPPI T 480 OM 2005.01.01 Specular gloss of paper and paperboard at 75 degrees
TAPPI T 489 OM 2008.01.01 Bending resistance (stiffness) of paper and paperboard (Taber-type tester in basic configuration)
TAPPI T 491 OM 2008.01.01 Water immersion number of paperboard
TAPPI T 496 SP 2008.01.01 Specimen preparation for cross directional internal tearing resistance for paper, paperboard and related materials
TAPPI T 507 CM 1999.01.01 Grease resistance of flexible packaging materials
TAPPI T 511 OM 2008.01.01 Folding Endurance of Paper (MIT Tester)
TAPPI T 515 OM 2004.01.01 Visual grading and color matching of paper
TAPPI T 525 OM 2006.01.01 Diffuse Brightness of Pulp, Paperboard and Pulp (d/0)
TAPPI T 526 CM 2004.01.01 Blister resistance of coated paper in heatset printing
TAPPI T 529 OM 2009.01.01 Surface pH measurement of paper
TAPPI T 534 OM 2009.01.01 Brightness of clay and other mineral pigments (d/0 diffuse)
TAPPI T 538 OM 2008.01.01 Roughness of paper and paperboard (Sheffield method)
TAPPI T 544 CM 2008.01.01 Aging of paper and board with moist heat
TAPPI T 545 OM 2007.01.01 Cross-Machine Grammage Profile Measurement (Gravimetric Method)
TAPPI T 546 OM 2006.01.01 Machine Direction Grammage Variation Measurement (Gravimetric Method)
TAPPI T 547 OM 2002.01.01 Air Permeance of Paper and Paperboard (Sheffield Method)
TAPPI T 549 OM 2008.01.01 Coefficients of static and kinetic friction of uncoated writing and printing paper by use of the horizontal plane method
TAPPI T 550 OM 2008.01.01 Determination of Equilibrium Moisture in Pulp, Paper and Paperboard for Chemical Analysis
TAPPI T 551 OM 2006.01.01 Thickness of Paper and Paperboard (Soft Platen Method)
TAPPI T 555 OM 2004.01.01 Roughness of paper and paperboard (Print-surf method) - Correction 2005
TAPPI T 558 OM 2006.01.01 Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester - Reinstated
TAPPI T 563 OM 2008.01.01 Equivalent Black Area (EBA) and count of visible dirt in pulp, paper and paperboard by image analysis
TAPPI T 566 OM 2008.01.01 Bending resistance (stiffness) of paper (Taber-type tester in 0 to 10 Taber stiffness unit configuration)
TAPPI T 567 OM 2009.01.01 Determination of effective residual ink concentration (ERIC) by infrared reflectance measurement
TAPPI T 569 OM 2009.01.01 Internal bond strength (Scott type)
TAPPI T 573 SP 2009.01.01 Accelerated temperature aging of printing and writing paper by dry oven exposure apparatus
TAPPI T 574 PM 2004.01.01 Wax in pulp, paper and paperboard - CORRECTION 2005
TAPPI T 575 OM 2007.01.01 Roughness of paper and paperboard, stylus (Emveco-type) method
TAPPI T 576 PM 2007.01.01 Tensile properties of towel and tissue products (using constant rate of elongation apparatus)
TAPPI T 577 PM 2008.01.01 Score bend test
TAPPI T 627 OM 2009.01.01 Determination of titanium dioxide
TAPPI T 631 OM 2005.01.01 Microbiological enumeration of process water and slush pulp
TAPPI T 648 OM 2009.01.01 Viscosity of coating clay slurry
TAPPI T 650 OM 2005.01.01 Solids content of black liquor
TAPPI T 653 OM 2003.01.01 Specular Gloss of Paper and Paperboard at 20 Degrees
TAPPI T 656 CM 1997.01.01 Measuring, Sampling, and Analyzing White Waters
TAPPI T 657 SP 2004.01.01 Sampling of fillers and pigments
TAPPI T 665 CM 2002.01.01 Analysis of Talc
TAPPI T 676 CM 1997.01.01 Viscosity of starch and starch products
TAPPI T 692 OM 2008.01.01 Determination of suspended solids in kraft green and white liquors
TAPPI T 698 CM 2003.01.01 Determination of Wetting Tension of Polyethylene and Polypropylene Films and Coatings (Modified Visking Analytical Technique)
TAPPI T 699 OM 2009.01.01 Analysis of pulping liquors by suppressed ion chromatography
TAPPI T 802 OM 2007.01.01 Drop Test for Fiberboard Shipping Containers
TAPPI T 803 OM 2006.01.01 Puncture Test of Container Board
TAPPI T 804 OM 2010.01.01 Compression test of fiberboard shipping containers - CORRECTION 2010
TAPPI T 807 OM 2008.01.01 Bursting strength of linerboard
TAPPI T 810 OM 2006.01.01 Bursting Strength of Corrugated and Solid Fiberboard
TAPPI T 811 OM 2007.01.01 Edgewise Compressive Strength of Corrugated Fiberboard (Short Column Test)
TAPPI T 812 OM 2003.01.01 Ply separation of solid and corrugated fiberboard (wet)
TAPPI T 820 CM 1985.01.01 Flexural stiffness of corrugated board
TAPPI T 821 OM 2006.01.01 Pin Adhesion of Corrugated Board by Selective Separation
TAPPI T 824 OM 2009.01.01 Fluted edge crush of corrugating medium (flexible beam method)
TAPPI T 825 OM 2009.01.01 Flat crush test of corrugated board (rigid support method)
TAPPI T 826 OM 2008.01.01 Short span compressive strength of containerboard
TAPPI T 829 OM 2008.01.01 Score Quality Test
TAPPI T 830 OM 2004.01.01 Ink rub test of container board
TAPPI T 831 OM 2009.01.01 Water absorption of corrugating medium: water drop penetration test
TAPPI T 832 OM 2007.01.01 Water Absorption of Corrugating Medium: Float Curl Method
TAPPI T 834 OM 2007.01.01 Determination of containerboard roll hardness
TAPPI T 835 OM 2008.01.01 Water absorption of corrugating medium: water drop absorption test
TAPPI T 836 OM 2009.01.01 Bending stiffness, four point method
TAPPI T 838 OM 2007.01.01 Edge Crush Test Using Neckdown
TAPPI T 839 OM 2008.01.01 Edgewise compressive strength of corrugated fiberboard using the clamp method (short column test)
TAPPI T 840 SP 2003.01.01 Testing Adhesives Used in Glued Lap Joints of Corrugated Fiberboard Containers
TAPPI T 841 CM 2003.01.01 Edgewise Compressive Strength of Corrugated Fiberboard Using the Morris Method (Short Column Test) - Reinstated
TAPPI T 843 OM 2009.01.01 Fluted edge crush of corrugating medium (rigid support method)
TAPPI T 1006 SP 2006.01.01 Testing of Fiber Glass Mats: Use of Modified TAPPI Procedures for Sampling and Lot Acceptance, Stiffness, Tear Resistance, and Thickness - Reinstated
TAPPI T 1007 SP 2006.01.01 Sample Location for Fiber Glass Mat Sheets - Reinstated
TAPPI T 1008 SP 2006.01.01 Test Conditions for Fiber Glass Mat Test Methods - Reinstated
TAPPI T 1009 OM 2006.01.01 Tensile Strength and Elongation at Break for Fiber Glass Mats - Reinstated
TAPPI T 1011 OM 2006.01.01 Basis Weight of Fiber Glass Mats - Reinstated
TAPPI T 1012 OM 2006.01.01 Moisture Content of Fiber Glass Mats - Reinstated
TAPPI T 1013 OM 2006.01.01 Loss on Ignition of Fiber Glass Mats - Reinstated
TAPPI T 1205 SP 2005.01.01 Dealing with suspect (outlying) test determinations
TAPPI T 1211 SP 2006.01.01 Acceptance Procedures for Calibration Laboratories
TAPPI T 1214 SP 2007.01.01 Interrelation of reflectance, R0; reflectivity, R 8; TAPPI opacity, C0.89; scattering, s; and absorption, k - Formerly TIP 0804-03
TAPPI T 1215 SP 2007.01.01 The determination of instrumental color differences
TAPPI T 1216 SP 2007.01.01 Indices for whiteness, yellowness, brightness, and luminous reflectance factor
TAPPI T 1217 SP 2002.01.01 Photometric linearity of optical properties instruments
TAPPI T 1218 2002.01.01 Callibration of reflectance standards for hemispherical geometry
TAPPI T 1219 SP 2007.01.01 Storage of Paper Samples for Optical Measurements and Color Matching
TAPPI T 1500 GL 2008.01.01 Optical measurements terminology (related to appearance evaluation of paper)
TAPPI T SET 2002.01.01 Complete Set of Test Methods
TAPPI T200 SP 2001.01.01 Laboratory Beating of Pulp (Valley Beater Method)
TAPPI T204 CM 2007.01.01 Solvent Extractives of Wood and Pulp
TAPPI T205 SP 2006.01.01 Forming Handsheets for Physical Tests of Pulp
TAPPI T212 OM 2002.01.01 One Percent Sodium Hydroxide Solubility of Wood and Pulp
TAPPI T213 OM 2006.01.01 Dirt in Pulp - Chart Method
TAPPI T218 SP 2002.01.01 Forming Handsheets for Reflectance Testing of Pulp (Buchner Funnel Procedure)
TAPPI T220 SP 2006.01.01 Physical Testing of Pulp Handsheets
TAPPI T222 OM 2002.01.01 Acid-Insoluble Lignin in Wood and Pulp
TAPPI T223 CM 1984.01.01 Pentosans in Wood and Pulp
TAPPI T226 CM 1982.01.01 Specific External Surface of Pulp
TAPPI T232 CM 2001.01.01 Fiber Length of Pulp by Projection
TAPPI T234 CM 2002.01.01 Coarseness of Pulp Fibers
TAPPI T236 OM 2006.01.01 Kappa Number of Pulp
TAPPI T240 OM 2007.01.01 Consistency (Concentration) of Pulp Suspensions
TAPPI T244 CM 1999.10.22 Acid-Insoluble Ash in Wood, Pulp, Paper, and Paperboard
TAPPI T254 CM 2000.01.01 Cupriethylenediamine Disperse Viscosity of Pulp (Falling Ball Method)
TAPPI T256 CM 1985.01.01 Water-Soluble Chlorides in Pulp and Paper
TAPPI T257 CM 2002.01.01 Sampling and Preparing Wood for Analysis
TAPPI T258 OM 2006.01.01 Basic Density and Moisture Content of Pulpwood
TAPPI T261 CM 2000.01.01 Fines Fraction by Weight of Paper Stock by Wet Screening
TAPPI T262 SP 2006.01.01 Preparation of Mechanical Pulps for Testing
TAPPI T263 SP 2002.01.01 Identification of Wood and Fibers from Conifers
TAPPI T266 OM 2002.01.01 Determination of Sodium, Calcium, Copper, Iron, and Manganese in Pulp and Paper by Atomic Absorption Spectroscopy
TAPPI T267 CM 1995.01.01 Compression wood identification in pulpwood
TAPPI T268 OM 2003.01.01 Weight-volume measurement of pulpwood
TAPPI T271 OM 2007.01.01 Fiber length of pulp and paper by automated optical analyzer using polarized light
TAPPI T275 SP 2002.01.01 Screening of Pulp (Sommerville-Type Equipment)
TAPPI T277 OM 2007.01.01 Macro Stickies Content in Pulp: the "Pick-Up" Method
TAPPI T279 PM 1999.01.01 Effective Fiber Lenght Index by Zero/Short-Span Tensile Testing
TAPPI T280 PM 1999.11.26 Acetone Extractives of Wood and Pulp
TAPPI T281 SP 2007.01.01 Open Drum Washer Mat Sampling Technique
TAPPI T400 SP 2006.01.01 Sampling and Accepting a Single Lot of Paper, Paperboard, Containerboard, or Related Product
TAPPI T401 OM 2003.01.01 Fiber Analysis of Paper and Paperboard
TAPPI T403 OM 2002.01.01 Bursting strength of paper
TAPPI T408 CM 2007.01.01 Rosin in Paper and Paperboard
TAPPI T411 OM 2005.01.01 Thickness (Caliper) of Paper, Paperboard, and Combined Board
TAPPI T412 OM 2006.01.01 Moisture in Pulp, Paper and Paperboard
TAPPI T413 OM 2002.01.01 Ash in Wood, Pulp, Paper and Paperboard: Combustion at 900 Degrees Celsius
TAPPI T418 CM 2007.01.01 Organic Nitrogen in Paper and Paperboard
TAPPI T423 CM 2007.01.01 Folding Endurance of Paper (Schopper Type Tester)
TAPPI T425 OM 2006.01.01 Opacity of Paper (15/d Geometry, Illuminant A/2 Degrees, 89% Reflectance Backing and Paper Backing)
TAPPI T429 CM 2001.01.01 Alpha-Cellulose in Paper
TAPPI T431 CM 1999.01.01 Ink Absorbency of Blotting Paper
TAPPI T433 CM 2002.01.01 Water Resistance of Sized Paper and Paperboard (Dry Indicator Method)
TAPPI T434 CM 1983.01.01 Acid-Soluble Iron in Paper
TAPPI T435 OM 2002.01.01 Hydrogen Ion Concentration (pH) of Paper Extracts (Hot Extraction Method)
TAPPI T438 CM 2006.01.01 Zinc and Cadmium in Paper
TAPPI T444 OM 2002.01.01 Silver Tarnishing by Paper and Paperboard
TAPPI T449 OM 2007.01.01 Bacteriological Examination of Paper and Paperboard
TAPPI T458 CM 2004.01.01 Surface Wettability of Paper (Angle of Contact Method)
TAPPI T460 OM 2006.01.01 Air Resistance of Paper (Gurley Method)
TAPPI T464 OM 2006.01.01 Water Vapor Transmission Rate of Paper and Paperboard at High Temperature and Humidity
TAPPI T465 SP 2006.01.01 Static creasing of paper for water vapor transmission tests
TAPPI T476 OM 2001.01.01 Abrasion Loss of Paper and Paperboard (Taber-Type Method)
TAPPI T483 CM 2002.01.01 Odor of Packaging Materials
TAPPI T493 CM 1984.01.01 Identification and Determination of Melamine Resin in Paper
TAPPI T494 OM 2006.01.01 Tensile Properties of Paper and Paperboard (Using Constant Rate of Elongation Apparatus)
TAPPI T495 CM 2003.01.01 Bending Number of Paperboard
TAPPI T500 CM 2007.01.01 Book Bulk and Bulking Number of Paper
TAPPI T502 CM 2007.01.01 Equilibrium Relative Humidity of Paper and Paperboard
TAPPI T504 CM 1997.06.20 Glue in Paper (Qualitative and Quantitative Determination)
TAPPI T509 OM 2002.01.01 Hydrogen Ion Concentration (pH) of Paper Extracts (Cold Extraction Method)
TAPPI T512 SP 2002.01.01 Creasing of Flexible Packaging Material Paper Specimens for Testing
TAPPI T516 CM 2000.01.01 Envelope Seal, Seam, and Window Patch Testing
TAPPI T519 OM 2006.01.01 Diffuse Opacity of Paper (D/0 Paper Backing)
TAPPI T520 CM 2007.01.01 Curl of Gummed Flat Paper
TAPPI T523 OM 2002.01.01 Dynamic Measurement of Water Vapor Transfer Through Sheet Materials
TAPPI T524 OM 2007.01.01 Color of Paper and Paperboard (45/0,C/2)
TAPPI T527 OM 2007.01.01 Color of Paper and Paperboard (d/0 C/2)
TAPPI T530 OM 2007.01.01 Size Test for Paper by Ink Resistance (Hercules-Type Method)
TAPPI T531 CM 2001.01.01 Starch Consumption in Corrugated Board (Enzymatic/Gravimetric Method)
TAPPI T532 CM 2001.01.01 Starch Consumption in Corrugated Board (Enzymatic/Colorimetric Method)
TAPPI T536 OM 2007.01.01 Resistance of Paper to Passage of Air (High Pressure Gurley Method)
TAPPI T537 OM 2002.01.01 Dirt Count in Paper and Paperboard (Optical Character Recognition - OCR)
TAPPI T541 OM 2005.01.01 Internal bond strength of paperboard (z-direction tensile)
TAPPI T543 OM 2005.01.01 Bending Resistance of Paper (Gurley-Type Tester)
TAPPI T552 OM 2007.01.01 Determination of wetting tension of polymeric films and coated surfaces via the Mayer rod technique
TAPPI T553 OM 2005.01.01 Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
TAPPI T556 OM 2005.01.01 Bending resistance of paper and paperboard (Lorentzen & Wettre type tester)
TAPPI T559 CM 2002.01.01 Grease Resistance Test for Paper and Paperboard
TAPPI T560 OM 2005.01.01 CIE whiteness and tint of paper and paperboard (d/0 geometry, C/2 illuminant /observer)
TAPPI T562 OM 2005.01.01 CIE whiteness and tint of paper and paperboard (Using 45/0 geometry, C/2 illuminant/observer)
TAPPI T564 SP 2006.01.01 Transparent Chart for the Estimation of Defect Size
TAPPI T568 OM 2007.01.01 Physical Area of Sub-Visible Contraries in Pulp, Paper and Paperboard by Image Analysis
TAPPI T572 SP 2008.01.01 Accelerated pollutant aging of printing and writing paper by pollution chamber exposure apparatus
TAPPI T600 CM 1983.01.01 Analysis of Formaldehyde in Aqueous Solutions and of Free Formaldehyde in Resins
TAPPI T602 CM 1997.03.17 Analysis of Sulfuric Acid
TAPPI T604 CM 2009.01.01 Sulfur dioxide in sulfite cooking liquor
TAPPI T610 SP 2002.01.01 Preparation of Indicators and Standard Solutions
TAPPI T611 CM 1997.01.01 Analysis of Bleaching Powder, Calcium Hypochlorite Bleach Liquor, and Bleach Sludge - Revised TAPPI T611 OM
TAPPI T613 CM 2000.01.01 Analysis of Caustic Soda
TAPPI T617 CM 2000.01.01 Analysis of Lime
TAPPI T618 CM 1984.01.01 Analysis of Limestone
TAPPI T619 CM 1984.01.01 Analysis of Salt Cake
TAPPI T621 CM 1982.01.01 Analysis of Rosin
TAPPI T622 CM 1984.01.01 Analysis of Sodium Hydrosulfite
TAPPI T624 CM 2000.01.01 Analysis of Soda and Sulfate White and GreenLiquors
TAPPI T628 CM 1982.01.01 Analysis of Rosin Size
TAPPI T632 CM 1984.01.01 Analysis of Sodium Silicate
TAPPI T646 OM 2006.01.01 Brightness of Clay and Other Mineral Pigments (45/0)
TAPPI T684 OM 2006.01.01 Gross Heating Value of Black Liquor
TAPPI T697 CM 2001.01.01 Accelerated Test for Viscosity Stability of Clay Slurries - Reinstated:2001
TAPPI T702 PM 2006.01.01 Rheological measurements for characterization of polyolefins: low-density polyethylene (LDPE) for extrusion coating
TAPPI T800 CM 1996.01.01 Drum test for fiberboard shipping containers (revolving hexagonal drum)
TAPPI T801 OM 2002.01.01 Impact Resistance of Fiberboard Shipping Containers
TAPPI T808 OM 2007.01.01 Flat Crush Test of Corrugated Board (Flexible Beam Method)
TAPPI T809 OM 2006.01.01 Flat Crush of Corrugating Medium (CMT Test)
TAPPI T813 OM 2004.01.01 Tensile test for the manufacturer麓s joint of fiberboard shipping containers
TAPPI T815 OM 2007.01.01 Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid fiberboard) (inclined plane method)
TAPPI T818 CM 2007.01.01 Ring crush of paperboard (flexible beam method)
TAPPI T819 CM 2007.01.01 Water Absorption of Corrugating Medium: Boat Method
TAPPI T822 OM 2007.01.01 Ring Crush of Paperboard (Rigid Support Method)
TAPPI T1014 2006.01.01 Moisture Sensitivity of Fiber Glass Mats
TAPPI T1015 2006.01.01 Fiber Glass Mat Uniformity (Visual Defects)
TAPPI T1016 2006.01.01 Average Fiber Diameter of Fiber Glass Mats
TAPPI T1200 SP 2007.01.01 Interlaboratory Evaluation of Test Methods to Determine TAPPI Repeatability and Reproducibility
TAPPI T1210 SP 2005.01.01 Units of Measurement and Conversion Factors
TAPPI T 1212 SP 2007.01.01 Light sources for evaluating papers including those containing fluorescent whitening agents
TAPPI TIP 0106-01 2002.01.01 Physical Data of Calcium Carbonate-Water Suspensior - Revised 2002
TAPPI TIP 0106-02 2005.01.01 Physical Data of Hydrous Kaolin-Water Suspensions
TAPPI TIP 0106-05 2009.01.01 Calcium carbonate pigment index
TAPPI TIP 0106-06 2008.01.01 Kaolin Clay Pigment Index
TAPPI TIP 0106-07 2008.01.01 Titanium dioxide pigment index
TAPPI TIP 0106-09 2006.01.01 Physical Data of Calcined Kaolin-Water Suspensions - Reinstated in 2005
TAPPI TIP 0301-01 2008.01.01 Corrugated Boxplant - List of Potential Hazards
TAPPI TIP 0302-04 2001.01.01 An Alternative Method for Designating Flute Sizes
TAPPI TIP 0304-01 2008.01.01 Procedure for Setting up a Raw Material Trial on the Corrugator
TAPPI TIP 0304-02 2001.01.01 Box Plant Quality Measurement: Why Test?
TAPPI TIP 0304-04 2001.01.01 Corrugated Caliper: Why Is It So Important?
TAPPI TIP 0304-06 2002.01.01 Starch Adhesive Preparation and Distribution Systems: Housekeeping
TAPPI TIP 0304-07 2001.01.01 Warp in Corrugated Board
TAPPI TIP 0304-08 1997.01.01 Some Questions and Answers on Gel Temperatures and on the Gel Temperature Test for Corrugating Adhesives
TAPPI TIP 0304-09 2009.01.01 The edge crush test (ECT): its relationship to box compression and its derivation from containerboard edge stiffness
TAPPI TIP 0304-10 2002.01.01 Troubleshooting a Glue Lap Problem
TAPPI TIP 0304-11 2002.01.01 Utilizing Statistical Process Control Techniques to Assist in Meeting Specification at Finishing Crush Process Control Points to the Paper and Paperboard Industries
TAPPI TIP 0304-12 2002.01.01 Obtaining Combined Board Caliper off the Corrugator for Use in Statistical Process Control Procedures
TAPPI TIP 0304-13 2003.01.01 Statistical Process Control - Procedures for Charting Warp
TAPPI TIP 0304-14 2002.01.01 Statistical Process Control of Starch Gelatinization Temperature
TAPPI TIP 0304-15 2002.01.01 Statistical Process Control of Starch Viscosity
TAPPI TIP 0304-16 2003.01.01 Evaluating glue lap adhesives
TAPPI TIP 0304-17 2001.01.01 Addendum to Corrugating Defect Technology Manual - Defects Related to the Use of Fingerless Singlefacers
TAPPI TIP 0304-18 2001.01.01 Viscosity Reading Procedure for Flexographic Corrugated Inks
TAPPI TIP 0304-19 2001.01.01 Curtain Coating Weight Test
TAPPI TIP 0304-20 2009.01.01 Calibration of flexible beam crush tester
TAPPI TIP 0304-22 2005.01.01 Starch Adhesive Trial
TAPPI TIP 0304-23 2008.01.01 Statistical process control pin adhesion
TAPPI TIP 0304-24 2009.01.01 Calibration and maintenance of the burst tester
TAPPI TIP 0304-25 2006.01.01 Understanding formaldehyde management
TAPPI TIP 0304-26 2005.01.01 Common curtain coating problems: causes, detection, and correction
TAPPI TIP 0304-27 2003.01.01 Green peel bond test at the corrugator
TAPPI TIP 0304-30 2000.01.01 Calibration and Maintenance of the Manually Operated Micrometer
TAPPI TIP 0304-31 2004.01.01 Splicer Defects and Cures
TAPPI TIP 0304-32 2009.01.01 Causes and corrections of common corrugator bonding problems